dirtyleft
Posts: 1
Joined: 6/24/2007
Status: offline
|
when i got my jet ski out of storage this year it would not crank. I hooked it up to the water hose and tried to chank it before i took itto the lake. anyway it would not start even with new plugs. I took the plugs off and noticed water in on the piston. so i took the head off and looked for a crack in the cylinder but did not see one. it seem to be leaking oil too, any ideals. think it is a crack in the block or think this sounds like a blown gasket between the cylinders and the block. both pistons had water in them. but I put it back together and it fired up on the first crank. and is still firing up but i still see water on the piston. anothe question why do the gaskets come in diffrent thicknesses?
_____________________________
dcain
|
Printable Version
1998 Sea Doo GTI water in the cylinder - 
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread